Networked Two-Bay Charging Station with AC Adapter (3000 Series)
Email A Friend Add To Wishlist
ATW-CHG3NAD
ADK-ATE-1335-00341
Audio-Technica
No Stock Call for Availability
Availability: In stock
$369.00

ATW-CHG3NAD

The ATW-CHG3NAD bundles the ATW-CHG3N networked two-bay charging station with the AD-SA1230XA AC adapter.

 

The charging station works with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters, charging NiMH batteries (not included) while they are housed within the transmitters. The station will automatically shut off if alkaline or damaged batteries are detected. Once fully charged, a maintenance charging function ensures that batteries retain their full power for as long as the transmitter remains in the charging station. The ATW-CHG3N is equipped with power and charging status indicator LEDs for easy monitoring.

 

When used with AT8687 link kit(s) (sold separately), the ATW-CHG3N can be linked with up to four ATW-CHG3 stations, with all powered by the single AD-SA1230XA AC adapter included in this bundle. The ATW-CHG3N also connects to networks via standard Ethernet cable, allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software.



ATW-CHG3N networked two-bay charging station with AD-SA1230XA AC adapter

Charging station works with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters

Charges NiMH batteries (not included) while they are housed within a transmitter

Automatically shuts off if alkaline or damaged batteries are detected

Indicator LEDs for easy monitoring of power and charging status

Up to five ATW-CHG3N/ATW-CHG3 charging stations can be linked and powered by a single AD-SA1230XA AC adapter (using AT8687 link kits, sold separately)

ATW-CHG3N connects to a network (via standard Ethernet cable), allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software

Transmitters power off automatically when placed in the charging station and power on automatically when removed

 


Specifications:

Power Requirements: 12V DC 3.0 A

Charging Output: 3.6V DC 500 mA (x2)

Power Consumption : 5.3 W (when 2 transmitters are charging)

27.8 W (when CHG3N and four CHG3 units are connected and 10 transmitters are charging)

Charging Time: Approx. 6.5 hours (1,900 mAh rechargeable battery)

Depending on battery type and use pattern

Operating Temperature Range: 0 C to 40 C (32 F to 104 F)

Dimensions (charger only): 185 mm (7.28") x 99 mm (3.90") x 68.5 mm (2.70") (W x D x H)

Net Weight (charger only): 410 g (14.5 oz)

Write Your Own Review
You're reviewing:ATW-CHG3NAD
Your Rating

Related Products