The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound quality and ease of operation, the MG12/15/18 have the ability to accurately capture and reproduce vocals from a comfortable distance.
The MG12/15/18 are characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. With a wide frequency range of 60 Hz - 19 kHz, the MG12/15/18 provide natural sound with exceptional transient response.
The MG12/15/18 gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other circuit built into the base of the XLR. This circuitry is internally balanced, insuring that the audio path will be isolated from hum and noise. In addition, the circuitry employs protection from RF and spurious emissions from cell phones
and wireless GSM devices.
The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on-off switch.
Manufactured with very high standards and tight tolerances, the
MG12/15/18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories. The MG12/15/18 operate on phantom power of 18 - 52 Volts and are available in non-reflective black matte finish.
Type: Condenser
Polar Pattern: Cardioid
Frequency Response: 60Hz - 19kHz
Impedance: 150 Ohms
Sensitivity: 32 mV/Pa @1kHz
Transducer Type Pre-PolarizedCondenser
Frequency Response 60Hz 19 kHz
Polar Pattern Cardioid/ Hypercardioid (MG12HC, MG15HC & MG18HC)
Output Impedance 150Ohms balanced
Sensitivity 38mV (C) / Pa @ 1k 32 mV (HC) / Pa @ 1k
Equivalent Noise Level 22dB (A weighted)
Signal to Noise Ratio 72dB
Maximum SPL 130 dB
Dynamic Range 108 dB
Power Requirements 18 52 Volts phantom
Polarity Positivepressure on diaphragm produces positive voltage on pin 2 relative to pin 3 ofoutput XLR connector
Materials / Finish MachinedBrass / Black Finish
Weight 118 g / 4.16ounces (MG12) 126 g / 4.44 ounces (MG15) 134 g / 4.73 ounces (MG18)
Length 415 mm / 16.3inches (MG12) 480 mm / 18.9 inches (MG15) 570 mm / 22.4 inches (MG18)
1 x MG12, MG15 or MG18 Miniature Gooseneck Condenser Microphone
1 x TM1218 Flange Table Mount
1 x WS1218 External Windscreen