Audix ADX18 ADX Series Miniature Gooseneck Condenser Mic (18", Cardioid)
ADX18 ADX Series Miniature Gooseneck Condenser Mic (18", Cardioid)
Free Shipping
Mac
Availability:
In stock
$209.00
The ADX series is a professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings, and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX series is designed with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit the microphone holder.
ADX18 – Cardioid 18″ podium microphone with flexible gooseneck at both the base and the top of the shaft. Requires 18-52 V phantom power.
Transducer Type Pre-PolarizedCondenser
Frequency Response 40Hz 18 kHz
Polar Pattern Cardioid/Hypercardiod
Output Impedance 150ohms
Sensitivity 24mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k
Equivalent Noise Level 28dB (A weighted)
Signal to Noise Ratio 66dB
Maximum SPL 120 dB
Power Requirements 18 52 Volts phantom
Connector 3-pinXLRm
Polarity Positivepressure on diaphragm produces positive voltage on pin 2 relative to pin 3 ofoutput XLR connector
Materials / Finish MachinedAluminum / Black Finish
Weight 113 g / 4 oz(ADX12) 159 g / 5.6 oz (ADX18)
Length 403 mm / 16 in(ADX12) 558 mm / 22 in (ADX18)
1 x ADX12 or ADX18 Miniature Gooseneck Microphone
1 x TM1218 Flange Table Mount
1 x WS1218 External Windscreen
Related Products
