1U Deluxe Channel Strip with Digital Outs
Email A Friend Add To Wishlist
Mac & Win
Availability: In stock


The Joemeek oneQ2 is the most full-featured, technologically advanced studio channel we've ever made!


Some changes we made to the oneQ2:

 The microphone input transformer is permanently assigned to the "Mic" Input. The "IRON" switch now optionally sends the "Line" input through the transformer, to add some colouration to Line sources.

 The input "GAIN" control now operates over the range 18dB to 60dB, with improved resolution in the crucial 25dB-45dB range. Microphone inputs up to +4dBu can be accommodated without distortion
(+24dBu by using the "PAD" switch).

 As before, with the "LINE" input selected the gain is unity (0dB) at the top of the dial; the gain range is now -19dB to +22dB.

 The "INSTRument" input now has a gain range of 0dB to +40dB.

 "PEAK" LEDs now light at +16dBu (2dB below Full Scale Digital).

A single channel combining Mic Pre (featuring Cinemag microphone transformers), four band EQ, the most flexible of any Joemeek ever, our "signature" optical compressor, De-Esser, and Enhancer, it's a master channel like no other.

Housed in a 2u chassis, the elegantly sculpted faceplate is intelligently laid out, with clear, easy to read legends and a large analog VU meter.

We even included 24bit, 96K A/D converters with word clock input and output.

The new oneq2 raises the bar for all studio master channels!

MORE oneq2 Reviews
Coming Soon!

oneq2 Specifications

Input impedances:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain:
10dB to 60dB (variable)
Common mode rejection:
Equivalent input noise:
-128.5dBu (unweighted)
0.001% (below Compressor threshold)
Frequency response:
15Hz to 70kHz (-3dB)
Maximum input before clipping:
Mic: +21dBu; Line: +45dBu
Headroom before clipping:
Compressor threshold:
∞dBu to -20dBu (variable)
Compressor ratio:
1:1 to 10:1 (variable)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
Output impedance:
Output Level switch:
12dB attenuation
Noise Floor:
-85dBu (typical, with ~40dB mic gain)
VU Meter:
Analogue movement
Power supply:
115V / 230V ac mains, 50/60Hz
Power consumption:
482W x 88H x 220D (overall)
3 kilos
High Pass Filter:
12dB per octave cut below 80Hz
EQ Boost & Cut:
+/-15dB (zero phase-shift bell response)
LF Frequency :
80Hz/120Hz switchable
LMF Frequency :
200Hz to 2kHz variable
HMF Frequency :
1kHz to 6kHz variable
HF Frequency :
7kHz/14kHz (selectable)
EQ “Q”
0.9 (1.6 octaves

Digital Output Specifications

24 Bit
24-bit delta sigma using Wolfson WM8738 ADC
Sampling Rate:
44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats:
AES3 compliant (balanced), S/PDIF electrical
This is [sample frequency divided by twice the bandwidth]. So for a 20kHz bandwidth sampled at 96kHz, oversampling = 2.4x.
However the term oversampling is sometimes confused with [clock frequency divided by sample rate]. In the DB-1 that would be 256x at 96kHz
Noise Floor: typically 92dB A-weighted (referenced to 0dBFS = +18dBu). So for a +4dBu signal, the SNR is 78dB
Distortion: typically 0.01% @ 0dBu (20Hz - 20kHz) at 96kHz sample rate
typically 0.02% @ 0dBu (20Hz - 20kHz) at 48kHz sample rate
typically 0.02% @ -1dBFS (20Hz - 20kHz) at all sample rates
External Word Clock input:
75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising)
typically -67dB (20Hz - 20kHz)

Digital Interface

The Joemeek Digital Audio Interface provides high quality digital audio outputs plus the ability to synchronize to an external word clock. The digital audio outputs are compatible with most digital recorders, as well as Digital Audio Workstations and mixers. S/PDIF format is available from the RCA phono connectors, while the transformer coupled XLR connector provides an AES3 compatible output.

The Joemeek Digital Interface has highly stable onboard master clocks for low-jitter, hi-fi results. Internal sample rates of 44.1kHz, 48kHz, 88.2kHz or 96kHz are selected by means of rear panel switches. 44.1kHz is the standard used for audio CD's, while 48kHz and 96kHz are widely used in recording studios. In general, the higher the sample rate, the better the audio fidelity, but the more disk space is required for the recording. For example, recording at 96kHz requires twice as much storage as 48kHz. Consult the manual of your recorder or DAW as to what sample rates it will accommodate.

Alternatively the oneq2 may be set to the frequency of an external master word clock, generated, for example, by the studio's recorder or DAW. When connected to the BNC socket provided, a suitable external word clock will be detected automatically and will override the twinQ's internal word clock.

The front panel LED labelled 'EXT CLK' illuminates when the oneq2 is successfully locked to an external word clock. To avoid distortion, care should be taken not to overdrive the input to the Digital Interface. The red LED next to the Output Gain control is labeled "PEAK FSD" which stands for "Full Scale Digital". Occasional flashes are OK but if it is on all the time, turn something down!



Input impedances:Mic: 1.2kohm; Line: 20kohmPre-amp overall gain:10dB to 60dB (variable)Common mode rejection:70dBEquivalent input noise:-128.5dBu (unweighted)Distortion:0.001% (below Compressor threshold)Frequency response:15Hz to 70kHz (-3dB)Maximum input before clipping:Mic: +21dBu; Line: +45dBuHeadroom before clipping:+21dBuCompressor threshold:dBu to -20dBu (variable)Compressor ratio:1:1 to 10:1 (variable)Compressor attack time:1 msec to 100 msec (adaptive)Compressor release time:0.1 sec to 3 sec (adaptive)Nominal output levels:+4dBu/-10dBvOutput impedance:100ohmOutput Level switch:12dB attenuationNoise Floor:-85dBu (typical, with ~40dB mic gain)VU Meter:Analogue movementPower supply:115V / 230V ac mains, 50/60HzPower consumption:30WMechanical:482W x 88H x 220D (overall)Weight:3 kilosHigh Pass Filter:12dB per octave cut below 80HzEQ Boost & Cut:+/-15dB (zero phase-shift bell response)LF Frequency :80Hz/120Hz switchableLMF Frequency :200Hz to 2kHz variableHMF Frequency :1kHz to 6kHz variableHF Frequency :7kHz/14kHz (selectable)EQ Q0.9 (1.6 octaves
Write Your Own Review
You're reviewing:Joe Meek oneQ2
Your Rating