KSM32 Cardioid Condenser Microphone

Home Audio Hardware Recording Gear Shure Incorporated Microphones Condenser Microphones KSM32/CG Embossed Single-Diaphragm Microphone (Charcoal Gray)
Embossed Single-Diaphragm Microphone (Charcoal Gray)
Email A Friend Add To Wishlist
SHU-KSM32
Shure Incorporated
Mac & Win
Low Stock Call for Availability
Availability: In stock
As low as $499.00

Embossed single-diaphragm, side-address microphone for highly critical studio recording and live sound productions.

Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range

Embossed, high-compliance diaphragm provides extended low-frequency response

Ultra-thin, gold-layered, low-mass, Mylar® diaphragm for excellent transient response

16 dB attenuation switch for handling extremely high sound pressure levels (SPL)

Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect

Integrated three-stage pop protection grille reducespop" and other breath noise

Internal shock mount reduces transmission of handling noise

Replacement cartridge: RK374

Extremely uniform polar response

Superior common mode rejection and suppression of radio frequency interference

Cartridge Type

Electret Condenser

Polar Pattern

Cardioid

Frequency Response

20 to 20,000 Hz

Output Impedance

150 

Sensitivity

open circuit voltage, @ 1 kHz, typical

36 dBV/Pa[1] (16.0  mV)

Maximum SPL

1 kHz at 1% THD[2]

PAD ON2500 load154 dB
1000 load148 dB
PAD OFF2500 load139 dB
1000 load133 dB

Signal-to-Noise Ratio[3]

81 dB

Dynamic Range

@ 1 kHz

2500 load126 dB
1000 load119 dB

Clipping Level

20 Hz to 20 kHz, 1% THD

2500 load9.0 dBV
1000 load3.0 dBV

Self Noise

equivalent SPL, A-weighted, typical

13.0 dB SPL-A

Common Mode Rejection

20 to 20,000 kHz

50 dB

Attenuator Switch

0, -15 dB

Low-Frequency Filter Switch

Flat, 6 dB/octave below 115 Hz, or 18 dB/octave below 80 Hz

Connector

Three-pin professional audio (XLR), male, balanced

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Power Requirements

1152 V DC[4] phantom power (IEC-61938), 4.7 mA

Net Weight

490 g (17  oz.)

[1] 1 Pa=94 dB SPL

[2]THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL

[3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

[4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.

Typical Frequency Response

 

Typical Polar Patterns

 

Overall Dimensions

Write Your Own Review
You're reviewing:KSM32 Cardioid Condenser Microphone
Your Rating

Related Products