Kiloview N30 12G-SDI/Full NDI® Encoder/Decoder
Kiloview N30 for NDI® supports up to 12G-SDI video input (Encoder) or 12G-SDI video output (Decoder).
It is small and compact enough to put in your pocket with the overall size of 100*80*28mm. It featured with an 12G-SDI audio input/output.
A tally system with a big tally light is built-in for indicating which camera is in program or preview. It also has the 3.5mm input and 12G-SDI loop for view on the monitor while NDI® streaming, or 12G-SDI output while decoding.
Kiloivew N30 for 12G-SDI has a wide DC input range from 5V to 18V, so it can be easily powered by USB, power bank or camera battery. It can also be powered over Ethernet (PoE).
A threaded screw camera mount is provided for your mounting on a camera. PTZ control is available by USB to Serial adaptor.
IP production for UHD video program
Project video to the wall at low-latency
Video transmission at low-latency
● Rack-mounted design to support install on the camera easily
● Plug and play, SDI to NDI®, or NDI® to 12G-SDI to screen can be easily realized
● SDI input/output supported to monitor during NDI® streaming
(Customize availablefor other unlisted PTZ protocols)
1*RJ45 (with POE)
Up to UHD 12G-SDI(Downward compatible with
SD/HD/VESA and custom resolution)
NDI encoding anddecoding
1NDI encoding or 1x NDI decoding
YCbCr 4: 2: 2 video encoding, typical bit rates: 250Mbps @4Kp60, 125Mbps @ 12G-SDI
Tally, power indicator, connection status indicator
Power supply modes
POE supported, DC 5-18v
Support (equipped with Kiloview software)
WEB page/IMS remote management
-20~45 (Storage temperature-20~70)