Kiloview N40 for NDI® 4K HDMI 2.0 NDI® Encoder/Decoder
Kiloview N40 for NDI® supports up to UHD 4Kp60 video input (Encoder) or 4Kp60 video output (Decoder). This converter is small and compact enough to put in your pocket with the overall size of 100*80*24mm. It features an HDMI2.0 input and HDMI2.0 loop through for view on the monitor while NDI® streaming, or HDMI 2.0 output while decoding. A tally system with a big tally light is built-in for indicating which camera is in program or preview. It also has the 3.5mm audio input/output which supports intercom (a Kiloview software required).
Kiloview N40 for NDI® has a wide DC input range from 5V to 18V, so it can be easily powered by USB, power bank or camera battery, it can also be powered over Ethernet (PoE). A threaded screw camera mount is provided for your mounting on a camera. PTZ interface by USB adapter is supported.
The N40 for NDI® is also compatible with Kiloview IMS software to help with the device management, NDI source management, remote configuration and upgrading, etc..
N40: 4K P60 HDMI/NDI® Bi-Directional Converter
(4K P60 HDMI input, 4K P30 HDMI loop or decoding output);
IP production for UHD video program
Project video to the wall at low-latency
Video transmission at low-latency
1*3.5mm Headphone(Out)/ Micro phone (Input)
1*RJ45 (with POE) 100/1000Mbps Ethernet
Up to UHD 4Kp60 (Downward compatible with
SD/HD/VESA and custom resolution)
NDI encoding anddecoding
1NDI encoding or 1x NDI decoding
YCbCr 4: 2: 2 video encoding, typical bit rates: 250Mbps @4Kp60,
Tally, power indicator, connection status indicator
Power supply modes
Options for POE, DC 5-18v
Support (equipped with Kiloview software)
WEB page/IMS remote management
-20~45 (Storage temperature-20~70)