RME Audio ADI-6432 Redundant

64 channel AES to MADI Format Converter w/ redundant PSU
Email A Friend Add To Wishlist
ADI 6432 R
ADK-RME-1400-00161
RME Audio
Win
Usually ships in 1-2 business days.
Availability: In stock
$4,449.00

New Drum SAMPLE PACK

 

Now included with every RME Interface

 

 

True Sound Studio RME Drum Sample Pack

 

The True Sound Drum Sample pack has been recorded by Ryan Wiesner of True Sound Studios using the RME BabyFace Pro.  This unique pack only available with the Premium Plug in Bundle was recorded at indoor and outdoor locations such as reverb lush grain silos, waterfront, garage, and studio rooms. The Samples include Kick, Snare, Toms, Rims and Hi Hats along with Percussion to make your recordings truly unique and with premium sound quality.

 

 

 

How to Get the RME Drum Sample Pack

 

When customers register their RME interface they will be sent to the Plugins Bundle Page to receive instructions for the Sample Pack along with all of the FREE 3rd Party PLUGINS.


The ADI-6432 converts all 64 channels of a single MADI stream to 32 AES/EBU ports and vice versa. Thus it supports all 64 channels of the MADI format at up to 48 kHz, 32 channels at up to 96 kHz and 16 channels at up to 192 kHz. Connected to the HDSP(e) MADI interface, the ADI-6432 turns into a powerful external 32-port AES/EBU interface. Two units will build a perfect digital multicore solution without any computer needed.

Connectivity and Features

·        32 x AES/EBU I/O

·        1 x MADI optical I/O

·        1 x Word Clock I/O

·        1 x Com-Port I/O

·        1 x MIDI I/O

 

Typical applications include two ADI-6432 used as digital multicore, or one unit used as AES/EBU frontend for the Hammerfall DSP MADI PCI card. Up to 192 kHz at 24-Bit are supported. Built with 2 units height there is enough space for all connectors and control elements.

 

Of course the unit includes lots of typical RME-features:

Support for up to 192 kHz with MADI and AES

Unique status displays for MADI and AES

SteadyClock for maximum jitter reduction and clock regeneration

Completely remote controlable via MIDI

Transfer of MIDI data via MADI

Transfer of RS232 data via MADI

 

The compact unit with 19" width and 2 unit height serves as format converter MADI to/from AES (schematic view). MADI handles 64 channels of 24-Bit audio at sampling frequencies up to 48 kHz, 32 channels up to 96 kHz, and 16 channels up to 192 kHz. All channels are transferred across a single cable, either coaxial (BNC) or optical network cable. In both cases, cable lengths of more than 100 meters can be achieved. The AES/EBU channels are provided as 32 AES/EBU inputs and outputs via D-sub connectors. The ADI-6432 accepts 56 channels and 64 channels as well as 96k frame at its input, and can be set to generate those formats at its output.

 

ADI-6432R: The RME ADI-6432 R is identical to the ADI-6432, but can be connected to two different electrical circuits. If one of these circuits fails, the ADI-6432 R will continue to operate without interruption.

 

Features

RMEs SteadyClock(TM) lets the ADI-6432 use MADI without an additional word clock connection, and guarantees excellent clock quality in every situation. Due to the highly efficient jitter reduction, any clock signal - even AES and word clock - can be improved and refreshed, and subsequently be used as reference clock at the word clock output. Intelligent Clock Control (ICC) will retain the last valid sample frequency in case of a loss of the input signal.

 

The ADI-6432 supplies word clock in Single, Double und Quad Speed, distributes Double Wire 96 kHz signals into the MADI data stream, and even supports the double MADI sample rate (96K frame). The SyncAlign ® and SyncCheck ® technologies known from other RME products ensure perfect synchronization and clear detection of errors. Also multiple units can be stacked and operated sample-aligned, using word clock. All settings are stored when the unit is switched off.

 

A fully automatic input selection between optical and coaxial input offers a useful redundancy mode for critical applications. Extensive status displays give information about lock and sync states, audio content and the physical quality of the incoming signal.

 

The front panel features an exciting and detailed sync and audio state display with 97 LEDs. Furthermore every function has its own keys accompanied by clear function LEDs. Especially in a professional application, exact, quick and direct control and display of all incoming and outgoing signals, including MIDI and RS232, becomes indispensable. Errors can be detected at a glance. The control keys can be locked to prevent accidental changing of settings.

ADI-6432 ADI-6432R

Input MADI: 1 x BNC, 1 x optical

Input AES/EBU: 32 x, 4 x per D-sub connector, transformerbalanced, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible

Output AES/EBU: 32 x, 4 x per D-sub connector, transformerbalanced, 4 Vpp

Input word clock: BNC, Signal Adaptation Circuit (functionalfrom 1.2 Vpp)

Output word clock: BNC, low impedance driver stage, 4 Vppinto 75 Ohms, short-circuit-proof

MIDI input and output: via two 5-pin DIN jacks

COM port: RS232 via 9-pin D-sub, 9600/19200/115200 Baud

Sync sources: MADI, AES, word clock, internal

Varipitch: by input signal or word clock

Sample frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz, variable (sync/word clock)

Sample rate range: MADI: 32 - 192 kHz, word clock: 27 kHz -200 kHz, AES: 28 kHz - 200 kHz

Jitter: Internal Clock < 1 ns, Word Clock In < 2 ns,AES/EBU In < 2 ns

Jitter suppression: >30 dB (2.4 kHz)

Jitter sensitivity: all PLLs operate error-free even at 100ns

Power supply: Internal switching mode PS, 100V - 240V AC, 20Watt

Dimensions: (WxHxD) 483 x 88 x 200 mm

Warranty: 2 years

Write Your Own Review
You're reviewing:RME Audio ADI-6432 Redundant
Your Rating

Related Products