Roland VC-1-DL Bi-Directional SDI/HDMI with Delay and Frame Sync
Roland VC-1-DL Bi-Directional SDI/HDMI with Delay and Frame Sync
Free Shipping
Availability:
In stock
$649.00
Bi-directional Conversion of video and audio signals from HDMI to SDI or SDI to HDMI with Frame Sync and Delay.
The VC-1-DL converter not only allows bidirectional conversion of SDI/HDMI but it also provides frame sync and delay adjustment of up to 9 fields (4.5 frames) for audio and video independently.
Lossless conversion in the palm of your hand. Awarding-winning multi-format conversion technology concentrated in a simplified mini-converter.
HDMI to SDI Conversion
SDI to HDMI Conversion
Lossless image conversion
3G ( Level A&B) /HD/ SD SDI
HDCP support
Selectable Channel for Embedded/De-Embedded Audio
Audio Delay - up to 9 fields (4.5 frames)
Video Delay - up to 9 fields (4.5 frames)
Uncompromising commitment to picture quality.
The VC-1 series faithfully converts the original source with no change in color or brightness. It supports super-blacks and super-whites, and converts video from cameras and other source devices with all the originality intact.
Faithful reproduction of video characteristics.
The VC-1 series reproduces the video characteristics of the original source with no interlace artifacts, pixel shifting, or other conversion problems or signal errors. Jitter and return loss are at exceptional levels as well.
On-board reclocker
The VC-1 series features an on-board reclocker to compensate for attenuation of SDI signals carried over long distances. This makes it possible to receive camera-relay video while maintaining a high image quality.
Support for 1080p 3G-SDI.
Video signals beyond 1080i can be input and output. The VC-1 series supports both level A and level B 3G-SDI, letting, you connect a wide variety of 3G-SDI equipment. 1080i, 720p, and SD signals are accommodated automatically on connection.
High quality, smart design.
The exterior plating is aluminum at 2 millimeters thick. The connectors laid out inside the exterior plates are fastened to the chassis with nuts and bolts. This makes for a heavy-duty specification that can keep the connectors from coming loose even with frequent cable changes, as well as withstanding impact and drops. Every connector has an LED input indicator enabling you to confirm the status of signal transmission at a glance. The series is built for uncompromising reliability that includes accurate operation even over long periods of continuous use thanks to a design featuring exceptional heat-radiating efficiency.
A form factor that accommodates use on-the-go.
Cutaway areas in the exterior plate enable you to fasten the unit to tripods or the like using velcro or elastic ties. This makes for convenient placement and setup even during live on-site use.
Support for HDCP HDMI signals.
The VC-1 series is compliant with HDCP. For example, the VC-1-DL can take HDCP-applied HDMI input signals, apply frame synchronization or delay, and produce HDCP-applied HDMI output. This allows the VC-1 series to be used in any HDCP-based system with no worries.
Support for workflow combining audio and video.
Audio embedding and de-embedding features are provided (channel-selectable) in the VC-1 Series. The audio embedding feature lets you place audio signals from a different source into the video output. For example, when converting an SDI signal to HDMI, you can use the audio embedding feature to output high-quality audio from any of the SDI audio channels. Digital (AES/EBU) input and output are also supported, letting you exchange sound between professional audio equipment.
- HDMI to SDIConversion
- SDI to HDMIConversion
- Lossless imageconversion
- 3G ( LevelA&B) /HD/ SD SDI
- HDCP support
- SelectableChannel for Embedded/De-Embedded Audio
- Audio Delay - upto 9 fields (4.5 frames)
- Video Delay - upto 9 fields (4.5 frames)
*Up/Down/Cross, Frame rate, I/P, and Aspect ratio conversionare not supported.
Input
HDMI
Type A (19 pins ) x 1
Analog Audio Connector
1/4" TRS phone type ( balanced ) x 1 pair (L/R)
Digital Audio Connector
1/4" TRS phone type ( balanced ) x 1
( Combined use with Analog Audio R ch Connector )
Processing
Audio embedding
Audio de-embedding
Output
SDI Connector
BNC type x 2
HDMI Connector
Type A (19 pins ) x 1 (Thru/Out )
Analog Audio Connector
1/4" TRS phone type ( balanced ) x 1 pair (L/R)
Digital Audio Connector
1/4" TRS phone type ( balanced) x 1
( Combined use with Analog Audio R ch Connector )
Input / Output Format
HDMI Input Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i,1280x720/60p/59.94p/50p/30p/29.97p/25p, 720x480/59.94i, 720x576/50i (Conformsto CEA-861-E)
HDMI Input Audio Format
Linear PCM, 24 bit, 48 kHz, 8 ch
SDI Output Signal Standards
SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
SDI Output Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i(Conforms to SMPTE 274M ), 1280x720/60p/59.94p/50p/30p/29.97p/25p (Conforms toSMPTE 296M),
720x487/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5 )
SDI Output Audio Format
Linear PCM, 24 bits, 48 kHz, 16 ch (Conforms to SMPTE 299M,SMPTE 272M-C)
HDMI Output Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i,1280x720/60p/59.94p/50p/30p/29.97p/25p, 720x480/59.94i, 720x576/50i (Conformsto CEA-861-E)
HDMI Output Audio Format
Linear PCM, 24 bit, 48 kHz, 8 ch
Audio Input / Output
Analog Audio Input Level
+4dBu
Analog Audio Maximum Input Level
+24dBu
Analog Audio Input Impedance
110 ohms
Analog Audio Output Level
+4dBu
Analog Audio Output Impedance
600 ohms
Digital Audio Output Signal Format
AES3, 16/24 bits, 32/48 kHz, 2 ch
Digital Audio Output Impedance
110 ohms
Others
USB Connector
USB Type B (Hi-Speed USB) x 1
Power Supply
DC 9V
Power Consumption
8W
Operation Temperature
+0 to + 40 degrees Celsius
Accessories
AC adaptor, Power Cord, Rubber Foot x 4, Owner's Manual
Size and Weight
Width (W)
150 mm5-15/16 inches
Depth (D)
130 mm5-1/8 inches
Height (H)
30 mm1-3/16 inches
Weight
500 g1 lbs. 2 oz.
Awarding-winning multi-format conversion technologyconcentrated in a simplified mini-converter.
Roland's new video converters address the demand forhigh-quality, lossless video and audio converters for live/post production aswell as installed systems.
Uncompromising commitment to picture quality.
The VC-1 series faithfully converts the original source withno change in color or brightness. It supports super-blacks and super-whites,and converts video from cameras and other source devices with all the originalityintact.
On-board reclocker.
The VC-1 series features an on-board reclocker to compensatefor
attenuation of SDI signals carried over long distances. Thismakes it possible to receive camera-relay video while maintaining a high imagequality.
Faithful reproduction of video characteristics.
The VC-1 series reproduces the video characteristics of theoriginal source with no interlace artifacts, pixel shifting, or otherconversion problems or signal errors. Jitter and return loss are at exceptionallevels as well.
Support for 1080p 3G-SDI.
Video signals beyond 1080i can be input and output. The VC-1series supports both level A and level B 3G-SDI, letting you connect a widevariety of 3G-SDI equipment. 1080i, 720p, and SD signals are accommodatedautomatically on connection.
High quality and rugged construction for the rigors offront-line use.
High quality, smart design.
The exterior plating is aluminum at 2 millimeters thick. Theconnectors laid out inside the exterior plates are fastened to the chassis withnuts and bolts. This makes for a heavy-duty specification that can keep theconnectors from coming loose even with frequent cable changes, as well aswithstanding impact and drops. Every connector has an LED input indicatorenabling you to confirm the status of signal transmission at a glance. Theseries is built for uncompromising reliability that includes accurate operationeven over long periods of continuous use thanks to a design featuringexceptional heat-radiating efficiency.
A form factor that accommodates use on-the-go.
Cutaway areas in the exterior plate enable you to fasten theunit to tripods or the like using velcro or elastic ties. This makes forconvenient placement and setup even during live on-site use.
Support for HDCP HDMI signals.
The VC-1 series is compliant with HDCP. For example, theVC-1-DL can take HDCP-applied HDMI input signals, apply frame synchronizationor delay, and produce HDCP-applied HDMI output. This allows the VC-1 series tobe used in any HDCP-based system with no worries.
Support for workflow combining audio and video.
Audio embedding and de-embedding features are provided(channel-selectable) in the VC-1 Series. The audio embedding feature lets youplace audio signals from a different source into the video output. For example,when converting an SDI signal to HDMI, you can use the audio embedding featureto output high-quality audio from any of the SDI audio channels.
Related Products
