3/15/2021 until 5/31/2021
Get Studio One Prime and Studio Magic Plug-in Suite when you purchase a PreSonus studio monitor.
Hearing in three dimensions.
The lifelike, three-dimensional soundstage of Sceptre® S6studio monitors has garnered praise from some of the most critical engineers inthe audio industry. Their unique design delivers pure and honest soundreproduction that brings to light subtle nuances in recordings that cannot beheard in other monitors. The result is panoramic imaging, finely detailedtransient response, and stunning dynamics is nothing short of astonishing.
The CoActual® difference.
The single point source provided by coaxial designs offersunique advantages, thanks to their consistent acoustic center and symmetricaldispersion pattern. The proprietary CoActual design in the Sceptre S6 studiomonitor relies on custom coaxial drivers and advanced onboard DSP to create aseamless crossover transition and an even frequency response. The net result isexceptional 3D imaging and a natural listening experience that reveals thesubtlest details.
With a conventional two-way studio monitor design thatplaces the high-frequency driver directly above the low-frequency driver, whereyou are listening is critical to how well you will hear the audio. By contrast,the Sceptre S6 studio monitor's frequency response is symmetrical horizontallyand vertically, thanks to its coaxial speaker design. When coupled with FulcrumAcoustics Temporal Equalization algorithms, the result is a crisper stereoimage, greater soundstage depth, more separation between components in acomplex mix, and a less fatiguing listening experience.
Accurate transient reproduction.
Consonant sounds in speech, percussion, attack and decay ofmusical instruments are all transient signals. Transients consist of complexcombinations of many frequencies. The phase relationships of these individualharmonics are a critical part of the characteristic “sound” of an instrument orvoice. When they are reproduced accurately, the result is sonic transparency,definition, and intelligibility. By maintaining the transient reproduction,even at high volumes, CoActual speakers minimize distortion and produce clean,clear, consistent audio at any SPL.
Monitors you can customize.
Sceptre-series studio monitors provide extensiveuser-adjustable contour features that let you optimize the monitors for yourmixing space. This enables full integration into any studio environment. Afour-position Acoustic Space switch helps to compensate for the boundary bassboost that occurs when the monitor is placed near a wall. A high-frequencydriver level control helps to further mitigate room anomalies. An onboardhighpass filter makes it easy to integrate a Temblor® or other subwoofer intoyour monitor setup.
The unique design of Sceptre S6 CoActual studio monitorsdelivers unmatched lifelike sonic reproduction and three-dimensionalsoundstage. Their ability to accurately reproduce transients and smoothfrequency response will reveal subtle nuances that afford a truly honestlistening experience. Hear them at your favorite PreSonus® dealer.
Combines DSP time-correction and point-source design forsymmetrical soundstage and micro-definition imaging
Unique coaxial transducer integrates 6.5-inch midrangedriver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial SpeakerCoherence Alignment
Powerful DSP provides critical Temporal Equalization™ withmultiple FIR filters
HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24dB/octave slope)
Sensitivity (+4 dBu to -10 dBV)
Power and safety
180W RMS, Class D biamplification with internal heat sink
102 dB maximum continuous SPL
RF shielding, current-output limiting, and over-temperatureprotection
Amplifier “soft start” feature eliminates popping onpower-up
Internal power supply with IEC connector
Power switch with on/off LED
Inputs and outputs
Balanced XLR and ¼-inch TRS line-level inputs with A-taperlevel control
1- Balanced XLR
1- Balanced TRS
Frequency Response (-3 dB) 52Hz - 20 kHz
Frequency Response (-10 dB) 42Hz - 23 kHz
Crossover Frequency 2.2kHz
LF Amplifier Power (@ 4) 90W
HF Amplifier Power (@ 4) 90W
Peak SPL (@ 1 meter) 109dB
LF Driver 6.5glass-reinforced paper
HF Driver 1diaphragm compression driver
Input Impedance 10k
Volume Range A-typetaper
HF Control Flat,+1, -1.5, -4 dB
Low Cut Flat,60, 80 Hz, 100 Hz
Acoustic Space Flat,-1.5, -3, -6 dB
External mains fuse
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Vinyl-laminated, medium-density fiberboard
Width 9 (230 mm)
Depth 12.2 (310 mm)
Height 13.2 (335 mm)
Weight 18.8 lbs (8.53kg)