SM35-TQG
Headset Cardioid Condenser Mic with Snap-fit Winds
SM35-TQG
ADK-SHU-1373-00238
Mac & 
Win
In Stock: YES
Total on hand: 6
As of 05/19/2022
Availability:
In stock
$99.00
The SM35 Performance Headset Condenser Microphone gives multi-instrumentalists the freedom to express themselves without sacrificing sound quality. A tight, unidirectional cardioid polar pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed onstage, whether in use in small clubs, large installations, or arena tours.
Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
Flexible gooseneck design allows for optimized placement that further improves source isolation
Lightweight and low-profile form enables comfortable, long-wearing use
TA4F (TQG) connector is compatible with any Shure wireless bodypack
Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
Tailored frequency response refined for clear, crisp vocal reproduction
Included in BLX and GLX-D® wireless systems, renowned for their ease of use and reliable performance
Legendary Shure precision engineering for durability and performance
Type
Electret Condenser
Frequency Response
40 Hz to 20,000 Hz
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
100 , @ 1 kHz
Sensitivity
-57.8 dBV/Pa, @ 1 kHz, 1000 load
Signal-To-Noise Ratio [1]
59.2 dB, @ 1 kHz, 1000 load
Maximum SPL [1]
151.3 dB, 1000 load, @ 1 kHz, 1% THD
Dynamic Range [1]
116.5 dB, @ 1 kHz, 1000 load
Self Noise [1]
34.8 dB SPL-A, 1000 load
Power Requirements
| TA4F | +5 V DC (nominal), 10 V maximum (DC bias) |
| XLR connector | 12 to 52 V DC, phantom power |
Polarity
| TA4F | Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
| XLR | Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 |
Cable
1.1m (45in.)
Connector
TA4F or XLR
Weight
72 g (2.53 oz.)
[1]Measurements taken using RPM400 preamp
*All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Write Your Own Review
Related Products
