Wireless System with SLXD1 Bodypack Transmitter and MX153T Earset Headworn Microphone

Home Audio Hardware Recording Gear Shure Incorporated Microphones Lavalier Microphones Wireless System with SLXD1 Bodypack Transmitter and MX153T Earset Headworn Microphone
SLXD14/153T-G58
Email A Friend Add To Wishlist
SLXD14/153T-G58
ADK-SHU-1372-00353
Shure Incorporated
Mac & Win
Low Stock Call for Availability
Availability: In stock
$859.00

The SLXD14/153T Wireless System delivers transparent, 24-bit digital audio and rock-solid RF performance for a wide range of applications, from day-long presentations to nighttime performances. Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories for wireless excellence, wherever required. Ships with SLXD4 dual-channel receiver, SLXD1 bodypack transmitters and MX153T Omnidirectional Earset Headworn Microphone with protective pouch, 3 windscreens, collar clip, antenna, rackmount accessories and 2 AA batteries.

Specifications 

System

RF

RF Carrier Frequency Range

470937.5 MHz, varies by region (See Frequency Range and Output Power table)

Working Range

100 m ( 328 ft)

RF Tuning Step Size

25 kHz, varies by region

Image Rejection

>70 dB, typical

RF Sensitivity

97 dBm

at 10-5 BER

Audio

Latency

3.2 ms

Audio Frequency Response

20  Hz 20 kHz (+1, -2 dB)

Audio Dynamic Range

118 dB

at 1% THD, A-weighted, typical

Total Harmonic Distortion

<0.02%

System Audio Polarity

Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.

Mic Offset Range

0 to 21 dB (in 3 dB steps)

Temperature Range

Operating Temperature Range

-18C (0F) to 50C (122F)

Storage Temperature Range

-29C (-20F) to 74C (165F)

SLXD4 / SLXD4D

Dimensions

SLXD442 x 197 x 152 mm (1.65 x 7.76 x 5.98 in.), H x W x D
SLXD4D42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.), H x W x D

Weight

SLXD4816 g, without antennas
SLXD4D1451 g, without antennas

Housing

Galvanized Steel

Power Requirements

15 V DC @ 600 mA, supplied by external power supply (tip positive)

RF Input

Spurious Rejection

>75 dB, typical

Connector Type

BNC

Impedance

50 

Phantom Power Protection

1/4" (6.35 mm)Yes
XLRYes

Audio Output

Gain Adjustment Range

-18 to +42 dB

in 1 dB steps

Configuration

1/4" (6.35 mm)Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
XLRBalanced (1=ground, 2=audio +, 3=audio )

Impedance

1/4" (6.35 mm)1.3 k (670 Unbalanced)
XLR (line)400  (200 Unbalanced)
XLR (mic)150 

Full Scale Output

1/4" (6.35 mm)+15 dBV differentially (+9 dBV single)
XLRLINE setting= +15  dBV, MIC setting= -15  dBV

Mic/Line Switch

30 dB pad

Networking

Network Interface

Single Port Ethernet 10/100 Mbps

Network Addressing Capability

DHCP or Manual IP address

Maximum Cable Length

100 m (328 ft)

SLXD1

Battery Type

Rechargeable Li-Ion or 1.5 V

AA batteries

Dimensions

98 x 68 x 25.5 mm (3.86 x 2.68 x 1 in.), H x W x D

Weight

89 g

Housing

PC/ABS

Audio Input

Connector

4-Pin male mini connector (TA4M)

Configuration

See drawing for details

Impedance

1 M

Maximum Input Level

8.2 dBV (2.57 Vrms,

7.27 Vpp)

Preamplifier Equivalent Input Noise (EIN)

-118  dBV

RF Output

Antenna Type

1/4 wave

Occupied Bandwidth

<200 kHz

Modulation Type

Shure proprietary digital

Power

1 mW or 10 mW

SLXD2

Battery Type

Rechargeable Li-Ion or 1.5 V

AA batteries

Dimensions

37.1 x 176 mm (1.46 x 6.93 in.), D x L

Weight

147 g

Housing

Aluminum


Write Your Own Review
You're reviewing:Wireless System with SLXD1 Bodypack Transmitter and MX153T Earset Headworn Microphone
Your Rating

Related Products